1.Item Specifics
-
Model Number: HS-8816-8
-
Material: TPR and PC
-
Certification: CE,RoHS,Reach138,ISO9001
-
Battery Type: Li battery
-
Usage: Warning
2.Description
-
Product Name: rechargeable LED flare
-
Short Description:
-
Led traffic warning flare lights ,Using high-capacity
-
battery as power, built-in IC chip control LED flash,
-
this light has 9 user-selectable flash patterns.
-
Completely waterproof! It even floats! Perfect for
-
boats and watercraft safety, also it is no problem
-
working underwater 1/2mile.
3.Advantages and Characteristics
-
compact & visible up to a 1/2 mile away.
-
Can also be placed safely on the ground and roadway. Casing is constructed of
-
super high strength plastic: PC, TPE and TPR, it is even no problem allowed a car
-
drive over it!
-
Completely waterproof! It even floats! Perfect for boats and watercraft safety, also
-
it is no problem working underwater 1/2mile.
-
Standard red LED is perfect for clear weather. In foggy conditions the yellow and
-
blue LED provide superior visibility. Also blue, green and white LED is workable!
-
Powered by a high capacity CR123 lithium battery with a storage life up to 10 years.
-
Store temperature from-40C to + 60C.
-
Safe to use in many HAZMAT situations.
4.Specifications:
Rechargeable LED strobe flare
|
|
Size
|
10cm diameter x 3.5cm high
|
Weight
|
6.7oz. (190 g) with battery
|
Battery
|
rechargeale Lithium battery
|
Shelf-Life
|
10 Years
|
Buoyancy
|
Positive (floats); can attach weight
|
Op. & Storage Temps
|
Fahrenheit: -40/-40 to 212/248 deg F
|
Celsius: -40/-40 to 100/110 deg C
|
Emission Source
|
360 degree LED array: solid-state; no filament
|
LED Light Colors
|
Red, amber, blue, green, white, infrared (IR).Custom colors available.
|
Daylight & Night Visibility Ranges
|
Night: visible to 900M (3,000 ft) on road or water, 10 miles (16 km) from air
|
Day: visible to 300M (1,000 ft).
|
Housing Color & Material
|
Polymer
|
Water Depth Rating
|
80M submersion
|
HAZMAT
|
Hermetically sealed; intrinsically safe
|
Chemical
|
Contains no hazardous chemicals, Withstands exposure to petroleum-based fuels
|
Switch Type
|
Push Button
|
Approvals & Certifications:
|
Complies with U.S. DOT (FMCSA) 49 CFR E 392.25 & 393.95(g).
|
MUTCD Type A (flashing) and Type C (solid on).
|
Designed to meet MIL-SPEC/MIL-STD 810 for shock, vibration, and water-resistance.
|
Pattern
|
Run Time
|
ROTATE
|
9 HOURS
|
QUAD-FLASH
|
9 HOURS
|
SINGLE-BLINK
|
60 HOURS
|
ALTERNATE
|
9 HOURS
|
SOS(MORSE CODE) RESCUE
(SOS)
|
14 HOURS
|
SOLID-ON HIGH
|
5 HOURS
|
SOLID-ON LOW
|
35 HOURS
|
2 LED FLASHLIGHT
|
9 HOURS
|
4 LED ILLUMINATE
|
6 HOURS
|
Note: Blue, Green and White color LED versions will run about 70-80% of listed times. Battery performance
can vary from factors such as temperatures, age of the battery, etc.
5.Step of Charging
1> Put the light on ground, back side is upturned.
2> Take out the ellipse charger, put the charger onto the light as photo shows
below, there has a + and mark on both of light and charger, face + to + and to -.
3> Connect the USB wire with the ellipse charger, now you can charger the
light through the computer USB plug.
4> If you want to charger the light through AC, please connect the AC charger.
5> If you want to charger the light through CAR Plug, take out the AC charger
and connect the CAR charger instead.
When it is succeed charging, the light on ellipse charger is GREEN, and when it
is full charger, the light on ellipse will turn RED.
LI battery in recharge series capacity: 700mAH/3.7V
AC charger: input voltage 100-240V, output voltage: 5.5V, out put electricity 450MA
Car charger: input voltage 12-24V, output voltage: 5.5V, output electricity 450MA
Charging time: battery can be fully charged within 2-3hours.
5.Product Show